Intel Ethernet Converged Network Adapter X550-T1 Intel Ethernet Converged Network Adapter X540-T2 Intel Ethernet Converged Network Adapter X540-T1 Intel Ethernet Converged Network Adapter X520-T2 Intel Ethernet Converged Network Adapter X520-SR2 Intel Ethernet Converged Network Adapter X520-SR1 Intel Ethernet Converged Network Adapter X520-QDA1 Intel Ethernet Converged Network Adapter X520-LR1 Intel Ethernet Converged Network Adapter X520-DA2 Intel Ethernet Converged Network Adapter X520-DA1 Intel 82599ES 10 Gigabit Ethernet Controller Intel 82599EN 10 Gigabit Ethernet Controller Intel 82599EB 10 Gigabit Ethernet Controller

This download is valid for the products listed below: To workaround this issue, remove the entry and let the tool update using the default full preservation option. NVM Update Tool: Reboot might fail after an update if the PRESERVATION entry has NONE or SELECTIVE in the confiuguration file. Linux RDMA Driver: RDMA vLAN may not be supported in the current release. Workaround: Set the MTU values to 4097 instead of 40 instead of 2048. Linux RDMA Driver: If setting the device MTU to either 4096 or 2048, applications using RoCEv2 UD might hang. Reboot the system to load the latest firmware. This does not indicate an update failure. Windows Driver: When updating from Release 25.6 to Release 26.1 using LANConf, the error 'Shared flash write failed!' might be displayed at the end of the update. Windows Driver: VxLAN and RDMA stays active when Intel Ethernet Network Adapter E810 is in Safe Mode. Linux Driver: On an Intel Ethernet E810 2CQDA2 adapter in single VLAN mode, users might see packets with S-tag being dropped.

Linux Driver: Server may perform reboot after adding VxLAN filter. Linux Driver: Unloading the ICE driver after a PCI reset causes an error in dmesg. Linux Driver: The call trace due to the use of WQ_MEM_RECLAIM flag has been fixed. Linux Driver: Driver rebuild may be failing due to vLAN add/delete failures. Linux Driver: The driver is incorrectly flagging egressing packets which causes LLDP packets to be dropped from interfaces. Linux Driver: Ethtool was incorrectly reporting supported and advertised auto-negotiation settings. General: In 8x10G mode link may not be established on some ports if the link is not connected at power on. Added support for higher power modules on select Intel Ethernet Network Adapters. Base drivers for Intel Ethernet 800 Series devices now support health status messages to report abnormal NIC issues Support for Intel Ethernet Network Adapter E810-XXV-4 for OCP 3.0

Intel network drivers windows 10